Comparative evaluation of ethanol versus citric acid in removal of oil-based calcium hydroxide from the apical third of root canal system.

Objectives: To evaluate the effectiveness of ethanol compared to citric acid in the removal of oil-based calcium hydroxide from the apical third of the root canal system using passive ultrasonic irrigation. METHODS: The in vitro study was conducted from September to October 2021 at the dental clinics of the Aga Khan University Hospital, Karachi, and comprised single-rooted teeth that were selected from institutional bank of extracted teeth. They were randomly divided into group A having 70% ethanol + passive ultrasonic irrigation, group B 10% citric acid + passive ultrasonic irrigation, group C positive controls and group D negative controls. The specimens were sectioned at 1mm and 3mm from the apex and examined under a dental operating microscope. A single examiner scored the specimens on two different occasions. Data was analysed using SPSS 25. RESULTS: Of the 90 teeth, there were 40(44.4%) in each of the 2 experimental groups and 5(5.5%) in each of the 2 control groups. At 3mm apical sections, ethanol was significantly more effective in the removal of oil-based calcium hydroxide (p=0.01). However, at 1mm from the apex, there was no significant difference between the experimental groups (p=0.064). Intragroup comparison showed that for groups A and B, residual medicament at 1mm sections was significantly greater than at 3mm sections (p<0.001, p=0.003). CONCLUSIONS: Neither irrigant showed complete removal at 1mm and 3mm from the apex. However, at 3mm apical sections, 70% ethanol was significantly more effective compared to 10% citric acid.

Microcomputed tomography analysis of curved root canal preparation when coronal flaring and glide path files used with heat-treated nickel titanium rotary files.

The objective was to evaluate the effect of glide path and coronal flaring on the dentin volume removal and percentage of touched walls in curved canals using two heat-treated rotary files. The mesiobuccal canal of forty-eight, randomly selected, extracted mandibular molars was divided into two groups of 24 each, according to the type of instrument used (RACE EVO and EdgeSequel rotary files). Each group was further divided into three subgroups; Group (A): Control using one file shaped to 04/30, Group (B) with a glide path (EdgeGlidePath (EGP)), and Group (C): with a glide path and coronal flaring (EGP and EdgeTaper Platinum (ETP) SX file respectively). The root canals were then instrumented using the assigned instruments. The assessment was carried out using micro-CT. The comparison of the mean values of the tested groups about dentin volume removal and percentage of untouched walls did not reach statistical significance (p<0.05). Glide path and coronal flaring had an insignificant effect on the dentin volume removal and percentage of untouched walls in curved canals.

Post-endodontic pain in curved canals prepared with different rotary instrumentation techniques: A randomized controlled trial.

BACKGROUND: Curved root canals are associated with the highest number of procedural errors during endodontic instrumentation. Recently, numerous rotary instruments have been developed, with both manual and automated mechanisms, to facilitate endodontic treatment and manage the complications related to it. OBJECTIVES: The aim of the study was to assess post-endodontic pain after using the HyFlex® EDM OneFile (HEDM), WaveOne® Gold (WOG) and XP-endo® Shaper (XPS) systems in the preparation of curved canals in patients with asymptomatic irreversible pulpitis. MATERIAL AND METHODS: A total of 45 molars with curved canals and asymptomatic irreversible pulpitis were randomly divided into 3 equal groups based on the instrumentation used: HEDM (group A); WOG (group B); and XPS (group C). All teeth were prepared according to the manufacturers' instructions. Postendodontic pain was assessed using the visual analog scale (VAS) at 6, 12, 18, 24, 48, and 72 h after root canal instrumentation. The data was analyzed using the one-way analysis of variance (ANOVA) and the paired-samples t test with the Bonferroni correction, with a p-value of 0.05 set for statistical significance. RESULTS: The highest levels of post-endodontic pain were recorded at 6 h after treatment. Then, the values gradually decreased until the pain nearly vanished after 72 h. No statistically significant differences were observed in the VAS scores between groups A and B. At the same time, group C showed the lowest VAS scores at all follow-up time points. CONCLUSIONS: The use of the XPS system resulted in the lowest pain scores at all follow-ups. The HEDM and WOG groups showed no differences in the pain scores throughout the whole follow-up period.

Postoperative pain after single-visit root canal treatments in necrotic teeth comparing instruments' kinematics and apical instrumentation limits - a prospective randomized multicenter clinical trial.

OBJECTIVES: This prospective randomized multicenter clinical trial (PRMCT) investigated postoperative pain after single-visit root canal treatments in teeth affected by pulp necrosis (PN), and asymptomatic apical periodontitis (AAP) (with apical radiolucent areas) or normal periradicular tissues (without apical radiolucent areas) comparing different instruments' kinematics and apical instrumentation limits. METHODS: Before chemomechanical preparation, 240 patients/teeth were randomly distributed into four groups (n = 60) according to the instruments' kinematics (rotary or reciprocating) and apical instrumentation limits (with or without intentional foraminal enlargement [IFE]). After that, specimens were submitted to the same irrigation and obturation techniques, and the patients were referred to undergo the definitive restorations. No medication was prescribed, but the patients were instructed to take either paracetamol (750 mg every 6 h for three days) or ibuprofen (600 mg every 6 h for three days) in pain cases. Postoperative pain incidence and levels were assessed at 24-, 48-, and 72 h following treatment completion according to a verbal rating scale (VRS) following a score. The Kolmogorov-Smirnov test was applied to assess the normality of the data. Mann-Whitney U, Chi-square, Friedman's ANOVA, and Friedman's multiple 2 to 2 comparison tests were employed to identify potential significant statistical differences among the variables in the study groups (P < .05). RESULTS: Significant statistical differences were only observed among the groups considering tooth, periradicular status, and the occurrence of overfilling (sealer extrusion) (P < 0.00). Patients with teeth instrumented through rotary kinematics and without IFE experienced lower rates of postoperative pain; however, this difference was relevant only at 24 h (P < 0.05). CONCLUSIONS: Postoperative pain was lower after using a rotary file system (Profile 04) inserted up to the apical constriction (AC). However, this finding was just statistically meaningful at 24 h. TRIAL REGISTRATION: This PRMCT was approved by the Human Research Ethics Committee of the Paranaense University - UNIPAR, Francisco Beltrão, PR, Brazil (CAAE. 46,774,621.6.0000.0109) on 02/09/2021. It was registered at The Brazilian Registry of Clinical Trials - ReBEC (RBR-3r967t) on 01/06/2023, was performed according to the Principles of the Helsinki Declaration and is reported following the Consolidated Standards of Reporting Trials Statement.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Atypical healing of an endodontic lesion following emergency treatment: a case report.

This case report examines the atypical healing of an endodontic lesion without standard endodontic treatment, influenced by the patient's failure to attend treatment appointments. A 50-year-old woman with no notable medical history presented with a deep carious lesion on her mandibular right first molar, accompanied by localized pain. Citing forgetfulness as a reason, the patient missed her initially scheduled root canal treatment, necessitating an emergency intervention. The emergency treatment included access cavity preparation, irrigation with 5.25% sodium hypochlorite solution, application of a modified triple antibiotic paste (equal parts penicillin G, metronidazole, and ciprofloxacin), and temporary restoration with amalgam. A large apical lesion was detected in immediate postoperative radiographs. However, the patient failed to return for definitive endodontic treatment, due to a lack of symptoms and time for treatment. Follow-up examinations 1 and 5 years after emergency treatment disclosed gradual healing of the lesion, culminating in the establishment of a normal periodontal ligament. This case underscores the potential efficacy of a modified triple antibiotic paste and highlights the importance of a well-sealed coronal restoration in promoting the healing of endodontic lesions, even in the absence of pulpectomy and conventional root canal therapy. Additional research is needed to understand the mechanisms behind such healing events.

[Comparison of the ability of four different kinds of nickel-titanium instruments to prepare simulated resin to simulate curved root canal forming].

PURPOSE: To compare the forming ability of four kinds of nickel-titanium instrument preparation resin for simulated curved root canal. METHODS: A total of 40 single bend resin simulated root canals were randomly divided into 4 groups with 10 in each group. Four kinds of nickel-titanium instruments (ProTaper, HyFlex EDM, WaveOne Gold and Reciproc Blue) were used for root canal preparation, and divided into group A, group B, group C and group D. The preparation time of the four groups was compared, the root canal images before and after preparation were analyzed by computer image analysis software, and the changes of the preparation time, curvature and curvature radius of the four groups were recorded. With the root tip as the center of the circle, the radius of 1-10 mm was selected as concentric circle arcs. The detection points were overlapping root canal intersection points. The resin removal amount and center positioning force of the inner and outer walls of the root canal at different detection points were recorded. Statistical analysis was performed with SPSS 20.0 software package. RESULTS: The root canal preparation time in group A was significant longer than that in group B, C and D(P＜0.05), but there was no significant difference in the curvature and curvature radius of the root canal among the four groups (P＞0.05). The removal amount of resin from the root canal wall in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 8, 9 and 10 mm, respectively. The removal amount of resin from the outer wall of the root canal in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 7, 9 and 10 mm, respectively. The root tip offset of group A from the detection point to the apical hole of 1, 2, 3, 4, 6, 7, 8, 9 and 10 mm was significant greater than that of group B, C and D(P＜0.05). CONCLUSIONS: Among the four instruments, ProTaper has the largest apical deviation, HyFlex EDM, WaveOne Gold and Reciproc Blue have better ability of root canal forming.

Evaluation of Postoperative Pain after Using Dexamethasone Intracanal Rinse in Irreversible Pulpitis.

OBJECTIVE: To evaluate the efficacy of dexamethasone as a final intracanal rinse in relieving postoperative pain of teeth with symptomatic irreversible pulpitis. STUDY DESIGN: Randomised controlled trial. Place and Duration of the Study: Department of Operative Dentistry, PIMS, Islamabad, Pakistan, from June 2019 to December 2020. METHODOLOGY: Sixty patients aged 18- 50 years diagnosed with symptomatic irreversible pulpitis were selected according to the inclusion criterion. After obtaining informed consent, root canal therapy (RCT) was initiated under rubber dam. Pulpectomy was done followed by canal preparation. The lottery method was utilised for the division of patients. Group A (experimental) received dexamethasone (4mg/ml in 5ml syringe) as a final rinse, while Group B (control group) recalled after 1 week and asked whether their pain had relieved or not as a yes/no question. After data collection teeth were obturated and permanent restoration was placed. Data were analysed using Chi-square test. RESULTS: The efficacy of dexamethasone as a final intracanal rinse was greater than saline 86.67% and 20.0%, respectively (p < 0.05) in relieving postoperative pain in teeth with symptomatic irreversible pulpitis. CONCLUSION: Dexamethasone was proved to be more efficacious than saline in alleviating postoperative pain when used as a final intracanal rinse after canal instrumentation. KEY WORDS: Irreversible pulpitis, Dexamethasone, Postoperative pain, Pulpectomy.

The evaluation of effective rate and pain intensity of root canal treatment in primary teeth-a retrospective study.

Two-visit root canal treatment for children reduce the time of visits and the by-chair time in comparison with the three-visit root canal treatment. However, it is not clear whether two-visit root canal treatment increase the risk of complications. This study aimed to evaluate the clinical effects and post-operative pain intensity after the root canal treatment between two-visit and three-visit groups in primary molars from children.106 patients were screened for eligibility, of which 74 went back to the preservation visit. Therefore, 74 primary molars from 74 children that diagnosed with chronic pulp and periodontal tissue diseases in the clinics of pediatric dentistry were retrospectively analyzed, in which 37 in the two-visit group and 37 in the three-visit group. The total effective rate and postoperative pain intensity were assessed after treatment and all statistical data were carried out with SPSS software.The average age of children in the two-visit and three-visit groups was 6.4 and 7.0, respectively, with no significant difference (p = 0.056). The two-visit group consisted of 59.5% male and 40.5% female children, while the three-visit group consisted of 56.8% male children and 43.2% female children (p = 0.813). Two months after treatment, the total effective rate in the three-visit group was 97.30%, a little higher than that in the two-visit group (94.59%), but with no significant difference (p = 0.201). Besides, there was also no significant difference in pain intensity between the two-visit and three-visit groups (p = 0.692). Therefore, there were no significant difference of total effective rate and pain intensity in root canal treatment between the two-visit and three-visit groups in primary molars from children.

Comparative evaluation of volumetric changes between two pediatric rotary files (Kedo-S plus, Kedo-SG blue) and manual files (hand K-files) during canal preparation of primary mandibular molars: an in-vitro nano-CT analysis.

Pediatric endodontics has become popular due to advancements in cleaning, shaping and irrigation systems, resulting in faster and effective removal of infected pulp, saving time, and creating a pathogen-free environment. The patented rotary file system, Kedo-S, designed for primary teeth, introduced a single file generation for efficient pulp therapy. However, there are currently no studies assessing canal preparation in primary mandibular molars using nano-CT (computed Tomography). To evaluate the volumetric changes of two recently introduced pediatric rotary file systems in comparison with conventional hand file systems in primary mandibular molar using an ultra-high resolution nano-CT. This in-vitro study was performed in extracted primary mandibular molar based on certain inclusion and exclusion criteria. Samples were prepared and working length was determined before the pre-operative scan using a high resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced pediatric dentist prepared the canals using three file systems: Kedo-S plus, Kedo-SG blue and Hand K-files. A post-operative scan was performed similar to pre-operative scan. Image reconstruction was performed with NRecon software for 3D volumetric visualization and analysis of the root canals. Kedo-SG blue file systems had the highest mean difference in the canal volume (8.85%). Hand K-files had the least difference at (1.24%) of canal volume. Kedo-S plus file system had a mean canal volume difference (6.14%) which is closer to hand K-files. Rotary file systems resulted in a significant enlargement of canals compared to hand files.

Influence of Different Glide Path Techniques on Microcrack Formation after Two Different Root Canal Preparation Treatments: Micro Computed Tomography Analysis.

OBJECTIVE: This study aimed to evaluate the effect of WaveOne Glider (WOGG) with Waveone Gold (WOG) primary reciprocation systems on root dentine microcrack formation and to know the effect of TruNatomy Glider (TRNG) with TruNatomy (TRN) prime rotary systems on root dentine microcrack formation. METHODS: In this study, 40 extracted mandibular first molar roots were selected and divided randomly into four groups (n=10). Group MWOG: a manual glide path was performed + WOG primary. Group MTRN: manual glide path performed+TRN prime. Additionally, group WOGG: glide path preparation with WOGG+WOG primary. Finally, for group TRNG, the glide path preparation was performed with TRNG+TRN prime. Micro-CT was used for pre and post-instrumentation image analysis. Statistical analysis was performed using the Kruskal- Wallis test (p<0.05) with Two-way ANOVA. RESULTS: The Kruskal-Wallis test showed no significant differences among all groups in all thirds for pre and post-instrumentation regarding the crack formation. The Two-way ANOVA showed no significant difference or interaction between the ways of glide path preparation, whether manual or reciprocal WOGG, or between the rotary TRNG and the motion used in root canal preparation (rotary TRN or reciprocal WOG) regarding the crack formation and propagation. CONCLUSION: Microcrack formation and propagation occurred independently of using different glide path techniques (manual, rotary, or reciprocal).

Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial.

AIM: To evaluate the intensity of postendodontic pain (PEP) using final irrigation with side-vented needle (SV), EndoActivator (EA), and Ultra X (UX) in single-visit endodontics (SVE) with F-One rotary files. MATERIALS AND METHODS: A total 150 patients indicated for endodontic treatment were selected. Single-visit endodontics treatment was performed under local anesthesia. For the final irrigation protocol, they were divided into three groups: group I (SV), group II (EA), and group III (UX). The severity of PEP was assessed using visual analogue scale (VAS) score after 6, 12, 24, and 48 hours. Analgesics taken by patients, for pain, were also recorded. Finally, the data were tabulated and statistically analyzed using SPSS 20.0 software at a level of significance being 0.05. RESULTS: Postendodontic pain was less in group III (UX) and group II (EA) compared with group I (SV) at 6 and 12 hours, which is statistically significant (p < 0.05). There was no statistically significant difference found after 24 hours and 48 hours. CONCLUSION: The intensity of PEP was minimum in patients treated with EndoActivator and ultrasonic along with single rotary file systems. The incidence of analgesic intake was similar in all three groups. How to cite this article: Kathiria NV, Attur K, Bagda KM, et al. Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial. J Contemp Dent Pract 2024;25(2):180-185.

Computational fluid dynamics investigation on the irrigation of a real root canal with a side-vented needle.

BACKGROUND: Root canal therapy is one of the main treatments for root canal diseases, and effective irrigation is the key to successful treatment. Side-vented needle is one of the commonly used needle types in clinic. In the real root canal, due to the influence of the curvature of the root canal, the irrigation flow field in different needle directions shows obvious differences. At the same time, changes in root canal curvature and working depth will lead to changes in irrigation efficiency and the flow field. Both the mainstream of the irrigation flow and the shear stress near the wall changes significant. Consequently, either the replacement in the root canal or the removal efficiency of the smear layers is apparently modified. MATERIALS AND METHODS: In this paper, the permanent root canal of the maxillary first molar prepared until 15/04 were scanned by micro-CT, and then imported into the software for 3D reconstruction. The key parameters of flushing efficiency of 30G side needle at different working depths of 4.75 mm, 5 mm, 5.25 mm and 5.5 mm were compared. Meanwhile, the simulated models with different curvatures of 0°, 5°, 10°, 20° and 30° based on the real root canal were reconstructed to investigate the curvature effect on the irrigation efficiency. RESULTS: The results show that moderate working depth (such as 4.75 mm and 5.25 mm in present paper) helps to improve the replacement capacity of irrigation flow. At the same time, the apical pressure decreased as the working depth increased. The curvature of the root canal seriously affects the removal depth of the smear layers of the root canal. A root canal with a large curvature (especially 20° and 30°) can significantly improve the difficulty of irrigation. CONCLUSIONS: (1) Moderate working depth helps to improve the displacement capacity, the ERD of the irrigation flow is generally improved at the working depths of 4.75 mm and 5.25 mm, and the apical pressure will decrease with the increase of working depth. (2) The large curvature of the root canal can significantly improve the difficulty of irrigation. The curvature of the root canal can severely influence the removal depth of the smear layer on the wall. It can be found both the span and the depth of the ESS for little curvatures (5° and 10°) root canals are higher than those for large curvatures (20° and 30°).

Activation of endodontic irrigants using a 9.3 µm CO2 and diode lasers: A laboratory proof of concept model.

PURPOSE: To investigate the differences between irrigant propagation and temperature changes using laser-activated irrigation (LAI) at different settings in an artificial root canal model. METHODS: Using an artificial resin root canal model, irrigant activation was achieved in 19 experimental groups with eight samples each. A 9,300 nm CO2 laser, two diode lasers with different settings (wavelengths 455, 808, 970, and 980 nm) were compared to 2,940 nm Er:YAG laser and traditional needle irrigation. Er:YAG and CO2 laser were activated in the pulpal chamber only, while diode lasers and needles were inserted into the main root canal. Lasers were activated for 5x 20 seconds resulting in 100 seconds of activation or rinsing for each sample. After each activation of 20 seconds, a photo was taken of the side canals and the propagation of the dye was measured with a digital measuring tool after calibration. Further, the temperature of the irrigant was reported after activation of 20 seconds and repeated 5 times. Data were checked for normality and statistically compared. RESULTS: All lasers increased the irrigant propagation compared to conventional irrigation. Significant differences were found between groups regarding propagation and temperature (P< 0.0027). Er:YAG and CO2 laser had similar effects on irrigant propagation in middle and apical located side-canals with specific power parameters and were superior to diode lasers and syringe irrigation. The irrigant's temperature increased significantly with the diode and CO2 lasers. CLINICAL SIGNIFICANCE: Diode lasers and CO2 lasers have not been established for irrigant activation. 9,300 nm CO2 lasers absorb well in water and were shown to introduce vapor bubble formation and streaming in water. Diode lasers are highly accepted in periodontics. The laser light is not absorbed in water but interacts with bacteria as well as soft tissues and contributes therefore to infection control. With a modified laser tip it was however possible to introduce cavitation and streaming in irrigants.

Micro-computed tomographic evaluation of the shaping ability of three nickel-titanium rotary systems in the middle mesial canal of mandibular first molars: an ex vivo study based on 3D printed tooth replicas.

BACKGROUND: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas. METHODS: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots. RESULTS: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05). CONCLUSIONS: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.

Comparation of the effectiveness of conventional needle irrigation and photon-induced photoacoustic streaming with sodium hypochorite in the treatment of teeth with apical periodontitis: a randomized clinical trial.

Photon-initiated photoacoustic streaming (PIPS) with an Er: YAG laser has been introduced in root canal treatment to improve irrigation and facilitate the removal of bacteria in the root canal system. This study aimed to compare the antibacterial effectiveness of two different root canal irrigation techniques, conventional needle irrigation (CNI) and PIPS, using 1% sodium hypochlorite (NaOCl), in the treatment of teeth with apical periodontitis. Sixty patients with a total of sixty teeth affected by apical periodontitis were included in this study. The teeth underwent root canal therapy, and after mechanical instrumentation, they were randomly assigned to two groups (n = 30) based on the final irrigation protocol: CNI or PIPS with 1% NaOCl. Bacterial suspensions in the root canals were evaluated using Adenosine 5'-triphosphate (ATP) assay kit after mechanical instrumentation and after final irrigation. Then, a follow-up was conducted after 7 days. The results revealed that final irrigation significantly reduced ATP values in both the CNI and PIPS groups (P < 0.001). The ATP values after final irrigation was greater in the CNI group compared to the PIPS group (P < 0.001). After a 7-day follow-up, percussion tenderness and fistula were significantly resolved in both groups (P < 0.05). A multivariate linear regression model was used to identify the factors that influence post irrigation ATP values. The analysis demonstrated that pre-operative percussion tenderness (P = 0.006), the presence of a fistula (P < 0.001) and the method used in the final irrigation (P < 0.001) had a significant impact on the ATP value after final irrigation. These results indicate that employing PIPS with 1% NaOCl as the final irrigation protocol exhibited superior antibacterial effectiveness and has the potential to enhance clinical outcomes in the treatment of teeth afflicted with apical periodontitis.

Expert consensus on difficulty assessment of endodontic therapy.

Endodontic diseases are a kind of chronic infectious oral disease. Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha. However, it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy (RCT). Recent research, encompassing bacterial etiology and advanced imaging techniques, contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT. Success in RCT hinges on factors like patients, infection severity, root canal anatomy, and treatment techniques. Therefore, improving disease management is a key issue to combat endodontic diseases and cure periapical lesions. The clinical difficulty assessment system of RCT is established based on patient conditions, tooth conditions, root canal configuration, and root canal needing retreatment, and emphasizes pre-treatment risk assessment for optimal outcomes. The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT. These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Comparing accuracy in guided endodontics: dynamic real-time navigation, static guides, and manual approaches for access cavity preparation - an in vitro study using 3D printed teeth.

OBJECTIVES: To assess root canal localization accuracy using a dynamic approach, surgical guides and freehand technique in vitro. MATERIALS AND METHODS: Access cavities were prepared for 4 different 3D printed tooth types by 4 operators (n = 144). Deviations from the planning in angle and bur positioning were compared and operating time as well as tooth substance loss were evaluated (Kruskal-Wallis Test, ANOVA). Operating method, tooth type, and operator effects were analyzed (partial eta-squared statistic). RESULTS: Angle deviation varied significantly between the operating methods (p < .0001): freehand (9.53 ± 6.36°), dynamic (2.82 ± 1.8°) and static navigation (1.12 ± 0.85°). The highest effect size was calculated for operating method (ηP²=0.524), followed by tooth type (0.364), and operator (0.08). Regarding deviation of bur base and tip localization no significant difference was found between the methods. Operating method mainly influenced both parameters (ηP²=0.471, 0.379) with minor effects of tooth type (0.157) and operator. Freehand technique caused most substance loss (p < .001), dynamic navigation least (p < .0001). Operating time was the shortest for freehand followed by static and dynamic navigation. CONCLUSIONS: Guided endodontic access may aid in precise root canal localization and save tooth structure. CLINICAL RELEVANCE: Although guided endodontic access preparation may require more time compared to the freehand technique, the guided navigation is more accurate and saves tooth structure.

Root canal curvature influences uncontrolled removal of dentin and cleaning efficacy after ultrasonic activation.

This study evaluated the correlation between root canal curvature and the effects of ultrasonic irrigation in the following parameters: volume of uncontrolled dentin removal (UDRVol), maximum depth of dentin defects, removal of accumulated hard tissue debris (AHTD), and canal transportation in prepared curved root canals. Twenty-four human permanent mandibular molars were divided into two groups according to root canal curvature: moderate curvature (MC: mean 25°); and severe curvature (SC: mean 48°). The specimens were scanned using an X-ray microcomputed scanner (Skyscan 1172) before and after cleaning and shaping and after the final irrigation protocol with ultrasonic irrigation. There was a moderate correlation between the degree of root canal curvature and the volume of remaining AHTD (p<0.05) and between the degree of root canal curvature and maximum depth of defects due to uncontrolled removal of dentin (p<0.05). The teeth in the SC group had a greater maximum depth of defects on the dentin wall in the apical third than the teeth in the MC group (p <0.05). Both groups had a significant reduction of AHTD in all canal thirds, but the amount of remaining AHTD in the middle and apical thirds and the whole canal was significantly greater in the SC than in the MC group (p <0.05). Canal transportation was not influenced by the canal curvature in all thirds (p >0.05). This study concluded that root canal curvature affects significantly the uncontrolled removal of dentin and remaining AHTD volume after the final irrigation protocol with ultrasonic irrigation.